AKPE-01M EXP
AKPE-01M EXP
Portable infrared breath alcohol analyzer with with external printer and built-in keyboard.
995 €
Product details AKPE-01M EXP
The analyzer of the concentration of ethanol vapor in exhaled air AKPE-01 is designed for expressive measurement of the concentration of ethanol vapor in the sel ected sample of the exhausted air.
Functions:- Enter fr om the built-in keyboard information about the item, the controller, the place of the survey, the number of the inspector badge and the number of the unit;
- Control expiration time;
- Monitoring and registration of exhalation interruption and incomplete exhalation with display of violations on the display;
- Measurement of the mass concentration of ethanol vapor in the exhaled air with the presentation of the result on a liquid crystal display;
- Saving fr om 2700 to 5400 measurement results with reference by date and time in the fiscal memory (set on request of the customer);
- Printout of the measurement results on the included printing device. Standard check thermal tape 57mm wide;
- Objectivity of the survey: eliminates the wrong result in cases wh ere alcohol is registered in the oral cavity, breathing is interrupted, and insufficient expiratory power is reported.
- Ambient air control: automatically controls the alcohol content in the ambient air and the sample delivery system;
- Protocol printout: the protocol contains measurement results, date, time, device number and protocol number. There is a fixed memory of results;
- Performance: allows you to perform up to 80 surveys in one hour;
- Accuracy: does not require calibration of the full service life and maintains the stability of the metrological characteristics without the use of calibration gas mixtures.
Specification AKPE-01M EXP
Range of measurements of large ethanol vapour concentration in exhaled breath
From 0 to 1,500 mg/l
Диапазон показаний
From 0 to 5,000 mg/l
Maximum permissible absolute error in the range of 0-0,200 mg/l
±0,020 mg/l
Maximum permissible relative error in a range higher than 0,200 - 1,500 mg/l
±10%
Time of measurement after sample selection
No more than 5 s
Set-up time after turning on at the ambient air temperature (20 ± 5) °С
No more than 3,5 min
Set-up time after measurement at the ambient air temperature (20 ± 5) °С
No more than 20 s
Number of measurements in analysers without recharging the rechargeable battery
No less than 250
Power supply
Power supply - On-board network (12.6±2) V - Built-in rechargeable battery - Network supply and charge (5±0,25) V
Power consumption in the warm-up mode, no more
10 va
Power consumption in operating mode, not more than
2,5 va
Dimensional specifications, no more than
195х50х80 mm
Weight, no more than
0,4 kg